Wireless Sensor batteries should last at least 12 months so when your Platinum Elite system displays the ‘flat battery’ icon for a particular zone, it is a relatively simple matter to replace the battery.  The sensors use CR2032 batteries.

  1. Remove the front cover by gently levering in either of the locations shown below.

  1. To remove battery, simultaneously push down safety tab (A) and push out battery (B). Please dispose of battery thoughtfully.

  1. Once battery is replaced, replace the front cover, which simply clips back into place. The sensor will automatically reconnect and start sending a signal.  The ‘flat battery’ icon on the Platinum Elite system will disappear.